Home > Buy Now > Other Organic Chemicals > ADC Blowing Agent
 


Sinobase Polymers Limited
 
icon Products

line

icon Company Profile
icon Selling Leads

line

 
Contact us
Sinobase Polymers Limited
[China]
Address:
Unit 902, Block D3, Xu Jing Jia Yuan, Zhongshan Da road Guangzhou Guangdong 510660 China
Phone:
86-20-62627046
Contact name:
Helen Lee , Export manager
Inquire now










Sinobase Polymers Limited



 
Products

ADC Blowing Agent

Inquire now

ADC Blowing Agent

Click to enlarge image

 Origin China

AC BLOWING AGENT


Chemical Name: Azodicarbonamide, Azobisformamide

Cas No. 123-77-3

Molecular Formula: C2H4O2N4

Molecular Weight: 116.08

Properties: Slightly yellowish powder. stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination.

Specifications:

Items                   AC-01         AC-02          AC-03         AC-04        AC-05
Appearance Light yellow powder
Gas evolving(ml/g) 220min       220min        220min       220min      220min
Decomposing temperature(oC) 195-205       195-205      195-205     195-205 

Heating Loss(%)    0.15max      0.15max      0.15max    0.15max    0.15max   
Ash,%                    1.5max      1.5max        1.5max      1.5max      1.5max
Particle size(microns) 12-15       10-12         8-10             6-8              3-5

Uses: It is widely used as blowing agent for cellular rubbers and plastics such as PVC, PE, EVA, PS with fine cell structure.

Packing: in 20 or 25kgs net bags or cartons.

 

 

 

BLOWING AGENT ACP/W

 

 

Chemical composition: mixture of AC, DPT blowing agents and other additives.

 

Features: Foaming at low temperature

Stable performance

Final products with good elasticity and whiteness

 

 

Specifications:

 

ITEMS

BLOWING AGENT (ACP/W)

Appearance

Faint yellow powder

 

 

Decomposition temperature, oC

132-138

Gas evolving( ml/g(@STP)

135-145

Moisture,%

0.50max

Particle size (microns)

9-14

 

Uses: It is broadly applied in the foaming of EVA, PE, PVC, synthetic rubber, mixture of PVC and NBR, especially for the hot pressing foaming in large or small mould of EVA MD sole.

 

Technical guide: ACP/W decomposes at lower temperature so no any other foaming auxiliaries need to be added. Through reducing the activating agent, the product will get a higher elongation rate.
It can provide with good foaming structure and whiter effect in EVA sole without affecting its physical performance.
It is suggested to use at a relatively low mixing temperature and normal sulfuring condition to avoid early decomposition.

 

Packings:25kg net cartons.

 




Inquire now